Guidelines for Restoring Fractured Central Incisors
Imen Kalghoum, Ines Azzouzi, Hadyaoui Dalenda*, Belhssan Harzallah, Mounir Cherif
Faculty of Dental Medicine, University of Monastir, Monastir, Tunisia
*Corresponding author: Hadyaoui Dalenda, Department of Fixed Prosthodontics, Research Laboratory of Occlusodontics and Ceramic Prostheses LR16ES15, Faculty of Dental Medicine, University of Monastir, Monastir, Tunisia. Tel: +21655967860; Email: dalendaresearch@gmail.com
Received Date: 03 January, 2018; Accepted Date: 06 February, 2018; Published Date: 14 February, 2018
Citation: Kalghoum I, Azzouzi I, Dalenda H, Harzallah B, Cherif M (2018) Guidelines for Restoring Fractured Central Incisors. Dentistry Adv Res: DTAR-145. DOI: 10.29011/2574-7347. 100045
1. Abstract
Faced with fractured central incisors, many solutions are available and the practitioner has to choose the appropriate one. Rehabilitation of the compromised teeth number 11 and 21 was performed with lithium discilcate veneers. The purpose of this clinical case is to outline the treatment approach and to highlight the different guidelines to establish function and esthetic using ceramic veneers.
2.
Keywords: Ceramic Veneers; Central Incisors; Dental Trauma; Esthetic; Function
1. Introduction
Traumatic dental injury has been confirmed as a current health problem in many recent studies. Nowadays [1,2]. First, trauma of the oral region occurs frequently and makes up 5% of all injuries for which people seek treatment in all dental clinics and hospitals in a country [2].
High-risk age groups for dental and facial trauma were 10-18 years and 19-28 years, which may be attributed to the fact this age-group usually has more intense social interaction and sports activities [3].
The teeth most commonly affected by trauma are the maxillary central incisors [3,4]. There are many causes for these such as falls, sports injiolenceuries, and vehicle accidents; other causes may also exist, depending on a country’s development and local habits [3-5]. The most frequent types of permanent teeth fractures are enamel fractures, enamel and dentine fractures, and enamel and dentine fractures with pulp involvement [6].
The conservative dental esthetic reestablishment treatments have been improved and evaluated with the development of adhesive materials. The adhesive dentistry allowed minimally invasive preparation through direct treatments with composite resin and indirect ceramic laminates veneers [7,8]. Despite the contribution of this treatment modality in terms of esthetic outcome, restoration of a fractured tooth in the anterior maxilla remains a challenge for even the most experienced dental practitioner. Several approaches for recovery of the esthetics and the function are available [7,8], Currently, the clinician must consider all diagnostic parameters before making a decision or recommendation to the patient. Direct resin is suitable when compromised structures is minimal allowing a natural look [9], However, Indirect restorations are indicated for greater strength and longevity, but they add a layer of complexity when communication with the laboratory technician is required for an esthetic outcome [10].
A range of dental ceramic materials is presently available on the market for these treatments, though with very different characteristics in terms of the composition, optic properties and manufacturing processes involved. In fact, a. A Font et al. created a classification based on the objectives of treatment: esthetic and/or functional problems Because of their predictable results and conservation of tooth structure, [11] ceramic veneers are indicated for the esthetic rehabilitation of fractured anterior teeth with anomalous position and appearance. The aim of this paper is to highlight the steps of dental rehabilitation in a 19-year-old patient with fractured central incisors which had been directly restored by composite resin and because of repetitive fracture of the resin. The patient restrained herself from smile due to self-consciousness. Seeking for a permanent restoration, the alternative solution was a fixed restoration using ceramic veneers., who restrained herself from smile due to self-consciousness, using ceramic veneers.
2. Case Presentation
H.F was a 19-year-old female patient reported to the department of
prosthetic dentistry, with a chief complaint of unattractive smile because of
her fractured tooth number 11 and defective composite restoration in tooth
number 21. Complete history of the patient along with preoperative photograph
was taken (Figure 1). Medical history was
non-contributory. Extra oral examination showed an ovoid face with a convex
profile.
Intraoral examination revealed that the right central
incisor was fractured in the middle-third of the crown, involving enamel and
dentin without pulp exposure (Figure 2) and
without symptoms of concussion or contusion, the left central incisor was
restored by composite but she complained from it repetitive loss. Oral
prophylaxis was done and dental hygiene maintenance instructions were given.
Radiographic examination and tooth vitality tests were positive. Anterior guidance
was evaluated.
several approaches for recovery of the esthetics and the masticatory function, depend on the type and extent of tooth fracture; In this case, the fracture is located in enamel a dent in with a loss of much tooth structure, the use of ceramic veneers is an excellent and suitable alternative.
In order to facilitate the treatment planning, a wax-up and cosmetic mock-up are recommended. The wax-up is a study model that present build- up wax teeth and the mock-up is obtained from silicon matrix filed with bis-acrylic resin [4] which provided a real three-dimensional in situ visualization of the final result of the proposed treatment.
Various techniques for accurate tooth reduction have been proposed, including silicone matrices, depth limiting burs and free hand preparation (Cherukara et al, 2005). It is important that whatever tooth reduction guide method is used, it is based on the definitive wax up and not the original tooth.
Failure to do this may result in excessive and
unnecessary removal of tooth enamel. Tooth should be prepared within the enamel
whenever possible. In this case depth limiting burs were used to prepare
directly through the bis-acryl mockup, as described by Gurel (2003) (Figure 3). The teeth were prepared with a marginal
chamfer labially and interproximally, and a butt fit margin palato-incisally with
wrap around onto the palatal aspect as described by Castelnuovo et al, 2000 (Figure 4). Contact points were not preserved, in
order to allow freedom for the technician to change the width and shape in the
final restoration. Ensure smooth finish
lines and surfaces, using 40-micron diamond abrasives. A smooth surface avoid
stress under the veneer and also a more uniform thickness of cement. This also
leads to better adhesion.
After adequate gingival retraction (Figure 4), a twostep dual impression was made and sent to the laboratory for fabrication of lithium disilicate (IPS e max cad) veneers. Lithium disilicate veneers were aided by computer (CAD), by coping the contours from the diagnostic wax-up. (Figures 5,6) Veneers were individually checked intra-orally to control gingival margins adaptation, the complete seating and embrasure opening, and occlusion. Then, shade and esthetics were well checked
To minimize contamination from saliva and blood, the
application of rubber dam is strongly recommended; In fact, blood can change
the completely the color of final restoration and because of esthetic failure. Currently
maintaining clean tooth with water and pumice during bonding is very important
for the success of this step. Light curing
composite resin were used for bonding. At the
end of the treatment, the patient was pleased with the results and no longer
hides her smile (Figures 7,8).
3. Discussion
unlike dental caries that have been declining over the last decades, Dental fractures are considered an increasing public health problem compromising aesthetic and function. If this trauma is not treated, personal problems can occur, such as difficulties in eating, laughing, and smiling, as well as emotional problems associated with public contact [12].
Aesthetic dentistry has expanded dramatically in the last two decades and re-establishing dental aesthetic appearance is a very important clinical challenge [13]. Currently, based on the type and the extent of tooth fracture, there are many treatment options and it is possible to restore function and esthetics using very conservative restorative techniques. In our case, the use of composites was well suited for our young patient because it is a very conservative technique for performing repairs without reduction in healthy tooth structure [14], Final restoration using nanoparticles-based composite resin was performed, allows restorations with shades and nuances similar to the adjacent dental structures. However, to achieve good results, this technique requires knowledge of the field of restorative material, dental anatomy, and the skills to reproduce all the characteristics of the tooth [9]. after a short time, there was a repetitive loss of restoration, because the restoration probably doesn’t support the masticatory efforts, mainly because of the insufficient area for bonding, Furthermore, those restorations should be limited for fractures limited in dental enamel or in enamel and dentin without loss of much tooth structure [8,9].
Currently, the use of ceramic veneers was indicated, it was introduced into dentistry as Hollywood veneers by Pincus [15] with a survival rates ranged from 92% at 5 years to 64 % at 10 years [15,16]. On another hand, according to a recent systematic review Composite and ceramic veneers were found to have statistically similar survival rates. Indirect composites showed 87 % survival rate compared with 100 % for ceramic veneers, with all failures occurring within 13 months of placement. No secondary, Caries were seen with either material. Temporary postoperative sensitivity developed with both ceramic (9%) and composite (26%).
According to some clinicians, provisionalization is not necessary because tooth reduction is minimal, but in reality, it’s an important step in the treatment plan as it gives to both patient and clinician the opportunity to access the final planned result [16] preparation, cementation, and finishing procedures adopted are considered key factors for the long-term success and aesthetical result of the veneer restorations. In addition, with improved mechanical properties of dental ceramics and the optical qualities of these materials have allowed the use of ceramics with esthetic predictability [1].
4. Conclusion
The success of minimally invasive restoration of fractured teeth dependent on the detailed planning and correct selection of dental materials. ceramic veneers provided good treatment outcomes and allowed a long-lasting functional and esthetic outcomes.
Figure 1: Extra-oral view.
Figure 2: Facial view of fractured central incisors (Right incisor was restored by
composite resin).
Figure 3: Starting teeth preparation within the mock-up.
Figure 4: Palatal view of
preparation.
Figure 5: IPS e max veneers.
Figure 6: Gingival retraction for a
secure bonding.
Figure 7: Final situation; veneers
bonded in bonded in place.
Figures 9,10: Natural look of
teeth restored after two months: Satisfying esthetic outcome: characterizations
reproduction, periodontal integration and function.